三峡工程大江截流的水文技术   总被引：2，自引：0，他引：2  

戴水平  季学武 《水文》1997,(6):1-7

鉴于三峡工程大江截流水深大，流量大，工期紧，特别是截流过程中要考虑不断航因素，因此，在大江截流和二期围堰阶段的施工进程中，应充分考虑到各方面的因素，尽可能采取一切减少大江截流和二期围堰施工难度的手段和措施，其中水文测验，水文气象预报，河道观测，水文分析与计算和水力学计算等水文工作则是为顺利实施高质量大江截流的重要条件。  相似文献   

MD－50型钻机液压系统的设计          下载免费PDF全文

于飞 《探矿工程》1996,(2):47-48

介绍了ＭＤ－５０型钻机液压系统的设计原理和主要液压元件的选择依据，并通过对设计和实践的总结，谈了作者在全液压钻机液压系统设计中的一些体会。  相似文献   

一种新型自动开槽机及其控制     

靳建刚  王丽红 《中国煤田地质》2004,16(5):60-62

针对棒、管料开槽的问题，提出了一种新型全自动开槽机。介绍了该开槽机的结构和工作原理，建立全自动开槽机相适应的液压系统，搭建了开槽机继电器——控制器控制电路，实现了该设备的全自动过程控制。  相似文献   

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination     

Jiongxin Xu 《地球表面变化过程与地形》2004,29(5):645-657

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

液压传感间接测量水位计的研制及其应用     

胡兴艺  丁跃进  王建家  汤文科  唐朋辉 《水文》2004,24(4):47-49

压力式水位计在水文自动测报系统中很难推广的主要原因是泥沙对传感器的影响,泥沙不但会使传感器测量精度达不到测验要求,而且由于泥沙淤积还会给水位计的日常维护带来很大不便。目前进口传感器测量精度高、稳定性能好,但仍避免不了泥沙的影响。针对这一问题,提出了一种新型压力式水位计———液压传感间接测量水位计,该水位计解决了泥沙对压力式水位计的影响,是一种具有很大发展前景的水位测量仪器。  相似文献   

"渗流-管流耦合模型"的物理模拟及其数值模拟   总被引：16，自引：2，他引：16  

陈崇希  万军伟  詹红兵  沈仲智 《水文地质工程地质》2004,31(1):1-8

井孔 -含水系统问题是当今水文地质学最重要的研究课题之一。长期以来 ,水文地质模型中对井孔的刻画基本上都是引用“热传导”中的“线汇”理论 ,需要人工预先给定线汇 线源的流量或水头的分配 ,其正确性或适用性至今没有得到理论证明。陈崇希 (1993 )提出的“渗流 -管流耦合模型”和“等效渗透系数”在理论上已解决多个水文地质问题 ,也用于几个实例 ,本文再用物理模拟检验其可靠性。论文针对具有典型意义的河床下水平井或傍河垂直井地下水流问题做了砂槽物理模拟 ,并用基于“渗流 -管流耦合模型”和“等效渗透系数”的数值方法仿真模拟了此条件下地下水流的规律。成果表明 ,数值模拟观测孔水头动态相当好地再现了物理模拟结果。论文指出了“渗流 -管流耦合模型”和“等效渗透系数”在井孔 -含水系统问题上的广泛应用前景。  相似文献   

Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam     

Jonathan D. Phillips  Michael C. Slattery  Zachary A. Musselman 《地球表面变化过程与地形》2005,30(11):1419-1439

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Channel geometry of mountain streams in New Zealand     

Ellen E. Wohl  Andrew Wilcox 《Journal of Hydrology》2005,300(1-4):252-266

A dataset of 21 study reaches in the Porter and Kowai rivers (eastern side of the South Island), and 13 study reaches in Camp Creek and adjacent catchments (western side of the South Island) was used to examine downstream hydraulic geometry of mountain streams in New Zealand. Streams in the eastern and western regions both exhibit well-developed downstream hydraulic geometry, as indicated by strong correlations between channel top width, bankfull depth, mean velocity, and bankfull discharge. Exponents for the hydraulic geometry relations are similar to average values for rivers worldwide. Factors such as colluvial sediment input to the channels, colluvial processes along the channels, tectonic uplift, and discontinuous bedrock exposure along the channels might be expected to complicate adjustment of channel geometry to downstream increases in discharge. The presence of well-developed downstream hydraulic geometry relations despite these complicating factors is interpreted to indicate that the ratio of hydraulic driving forces to substrate resisting forces is sufficiently large to permit channel adjustment to relatively frequent discharges.  相似文献   

CGD-1型大口径全套管冲击抓斗的设计和应用          下载免费PDF全文

冯起赠  宋志彬  王年友 《探矿工程》2005,32(6):38-40

CGD－1型大口径全套管冲击抓斗主要是配套全套管钻机施工而研制的。该抓斗主要适用于复杂地层的施工。介绍了该抓斗的技术参数、性能特点、主要结构及试验情况。  相似文献   

旋挖钻进中硬岩及卵砾层钻头结构及施工工艺研究          下载免费PDF全文

张公正 《探矿工程》2005,32(2):40-42

旋挖钻进技术作为一种高效优质的钻进方法近年来广泛地被用于公路、铁路及大型水电站基础工程施工建设中，取得了良好的社会效益和经济效益。探讨了在卵砾石、漂石等复杂地层以及坚硬基岩中进行旋挖钻进所用钻头的结构及其施工工艺。  相似文献